See Customer Photos
new
No Tools 2" Cordless Faux Wood Blinds
A Blindster exclusive, our no tools 2" cordless faux wood blinds have uniquely designed brackets with an ultra-strong 3M adhesive backing that makes installation a breeze. The brackets were tested and approved by an Independant Laboratory to provide a secure, long-lasting mount. And no screws means no holes in your window frame! Plus, cordless blinds offer a clean look and are safer in homes with kids or pets.
Product info
Product Colors
White
Product Details & Features
Description
- No screws or tools needed for installation
- Resistant to moisture, perfect for bathrooms and kitchens
- Specially designed mounting bracket with 3M adhesive backing
- Brackets tested and approved by an Independant Laboratory to provide a secure, long-lasting mount
- Brackets can be removed using a putty knife and a hair dryer
- Once removed the brackets cannot be reused
- Replacement brackets are available for a nominal charge
- Fade, Scratch & Warp Resistant
- Safer around small children and pets
- Conforms with C.P.S.C. child safety guidelines
- Customized in Mexico
- Please Note: Inside top mount only. These blinds cannot be installed outside mount.
Specifications
- Wand tilt on left side
- 3" crown molded valance included
- Width deduction on inside mount blinds is 1/4".
- 2 3/8" x 1 3/4" metal headrail
- Minimum width: 20"
- Maximum width: 72"
- Minimum height: 24"
- Maximum height: 74"
- Minimum depth for inside mount: 2"
- Depth required for flush mount: 3 1/4"
Questions & Answers
Measure & Install Instructions
Watch our How to Measure Video
Watch our How to Install Video
Inside Mount
- Blinds mounted inside the window frame
- Provides a clean look
- Ideal for windows with decorative trim
- 3" depth required for full recess (blinds flush with the wall)
- Minimum 1 1/8" depth required
Outside Mount
- Blinds mounted to the wall, trim, or ceiling outside the window frame
- Ideal for shallow depth windows and doors
- No minimum depth requirement
- Minimum 2 1/4" flat space required
Measuring for Inside Mount
STEP 1: Measure the width of your window opening in 3 places - top, middle and bottom. Record the most narrow of your 3 measurements to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8". This is the width you will order. The factory will deduct approx. 1/4" from the width you order to allow space for the mounting brackets and allow room for operation. The valance deduction is approx. 1/8".
STEP 2: Measure the height of the window opening in 3 places - left, middle and right. Record the tallest of the 3 measurements. This is the height you will order. There are no height deductions, the blind will be made to the height you order with a minimal 1/8" tolerance.
Measuring for Outside Mount
STEP 1: Measure the width of the area you want to cover from outside edge to outside edge. This is the width you should order. The blind will cut to the exact width you specify. The valance will be approx. 1 1/2" wider than blind with approx. 3" returns which cover the mounting brackets.
STEP 2: Measure the height of the area you want to cover from outside edge to outside edge. This is the height you should order. There are no height deductions, the blind will be made to the height you order with a minimal + 3/4" tolerance.
How to Install Wood Blinds
Download Instructions