
Privacy Wood Blinds are made with top quality kiln-dried basswood, these blinds have a unique design that eliminates the traditional route holes in the slats for added privacy and light control. All metal components and genuine American hardwood treated with with UV inhibitors help this blind resist fading and warping for years of enjoyment.
STEP 1: Measure the width of your window opening in 3 places - top, middle and bottom. Record the most narrow of your 3 measurements to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8". This is the width you will order. The factory will deduct approx. 1/2" from the width you order to allow space for the mounting brackets and allow room for operation. The valance deduction is approx. 1/8".
STEP 2: Measure the height of the window opening in 3 places - left, middle and right. Record the tallest of the 3 measurements. This is the height you will order. There are no height deductions, the blind will be made to the height you order with a minimal 1/8" tolerance.
STEP 1: Measure the width of the area you want to cover from outside edge to outside edge. This is the width you should order. The blind will cut to the exact width you specify. The valance will be approx. 3/4" wider than blind with approx. 3" returns which cover the mounting brackets.
STEP 2: Measure the height of the area you want to cover from outside edge to outside edge. This is the height you should order. There are no height deductions, the blind will be made to the height you order with a minimal + 3/4" tolerance.