See Customer Photos
No Tools Cordless Blackout Cellular Shades
A Blindster exclusive, these blackout cellular shades block 100% of natural light and require no tools to install! These shades have patent-pending mounting brackets with a strong adhesive backing that's been rigorously tested by an Independent Laboratory and approved to provide a secure and long-lasting mount; and no screws means no holes in your window frame! The blackout honeycomb-shaped material has a mylar lining for 100% light blockage and maximum insulaton.
Product info
Product Colors
White
Daylight
Ivory
Vanilla
Dove Grey
Tussah
Amber
Storm
Espresso
Product Details & Features
Description
- Fabric blocks 100% of natural light
- No screws or tools needed for installation
- Specially designed mounting bracket with adhesive backing
- Independently laboratory tested and approved and approved
- Brackets can be removed using a putty knife and a hair dryer
- Once removed the brackets cannot be reused
- Replacement brackets are available for a nominal charge
- 1/2" single cell honeycomb construction
- Provides an insulating R-Value of 5.0
- Fabric is a durable non-woven polyester with mylar lining
- Cordless feature perfect for homes with small children and pets
- PVC headrail and bottomrail color coordinated to shade fabric
- Shade fabric is GREY to exterior for uniform appearance
- Conforms with C.P.S.C. child safety guidelines
- Customized in Mexico
- Fit or Free™ Guarantee
- 60 Day Satisfaction Guarantee
- Limited Lifetime Warranty
Specifications
- Specially designed mounting bracket with adhesive backing
- Brackets can be removed using a putty knife and a hair dryer
- Once removed the brackets cannot be reused
- Replacement brackets are available for a nominal charge
- 1/2" single cell construction
- Innovative design where only the back of the fabric pleat is lined with mylar to eliminate light
- Separate orders may have slight variations in color due to dye-lot issues
- Upscale cordless lift system
- New bottomrail handle design
- Connector device available to join two shades for window widths greater than 72"
- 1 3/4" x 1 1/2" color coordinated metal headrail
- Color coordinated PVC bottomrail
- Minimum width: 19"
- Maximum width: 72" (single shade); 144" (connected shades)
- Minimum height: 24"
- Maximum height: 84"
- Minimum depth required for inside mount: 1 3/8"
- Depth required for inside flush mount: 2"
- Minimum flat space required for outside mount: 1"
- Not recommended for sliding glass doors
Questions & Answers
Measure & Install Instructions
Watch our How to Measure Video
Watch our How to Install Video
Inside Mount
- Mounted within the window frame
- Provides a clean, built-in look
- Great way to leave attractive woodwork exposed
- Minimum depth required for secure inside mount: 1 3/8"
- Depth required for inside flush mount: 2"
- Minimum flat space required for outside mount: 1"
- If window frame isn't deep enough, please select outside mount
Outside Mount
- Great option when there is not enough depth for an inside mount
- Mounted to the wall, ceiling or molding surface surrounding the window
- Often used to make the window appear larger or to hide a less attractive window or door
- No minimum depth requirement
- Minimum flat surface (on wall, ceiling, or frame) required for secure mount: 1". Be sure to take into account the flat mounting surface area when measuring the area you want to cover with your shade. The factory will make your shade (including the headrail) to the width and height ordered.
Measuring for Inside Mount
STEP 1: Measure the width of your window opening in 3 places - top, middle and bottom. Record the most narrow of your 3 measurements to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8". This is the width you will order. The factory will deduct approx. 3/8 to 1/2" from the width you order to allow space for proper operation.
STEP 2: Measure the height at 3 locations - the left side, middle and right side. Record the largest of the 3 measurements. This is your ordering height.
Measuring for Outside Mount
STEP 1: Measure the width of the area you want to cover from outside edge to outside edge. This is the width you should order. Including the endcaps, the shade will measure approx. 1/4” wider than the size you specify.
STEP 2: Measure the height of the area you want to cover from outside edge to outside edge. This is the height you should order. There are no height deductions, the shade will be made to the height you order.
How to Install Cordless Blackout Single Cellular Shades
Download Instructions
How to Install Cordless Blackout Single Cellular Shades (Quick Install Guide)
Download Instructions