Measuring Instructions for 2" Cordless Vinyl Faux Wood Blinds
Choose your mount type below and follow the numbered steps. Always measure to the nearest 1/8" and write down every measurement.
- 3 minutes to measure
- Inside & outside mount
What You'll Need
- Metal tape measureMore accurate than cloth tape
- Pen or pencilTo note each measurement
- PaperOr the notes app on your phone
Inside Mount
Fits inside the window frame
Let's make sure an inside mount will work for your window! Using a metal tape measure, first check if you have sufficient depth:
- Measure inside the window opening from the back of the window to the front of the opening where the blind would mount. The depth at the top of the window must be at least 1 7/8" to mount the brackets. To have a flush mount (meaning the blind is fully recessed in the window opening) the depth must be at least 3".
If your depth is not sufficient for mounting the brackets, please see our outside mount instructions or consider a different product.
How to Measure
Let's start with the Width
- Measure inside of the window opening/frame from left to right to the nearest 1/8" at three places: at the top of the opening, the middle of the opening, and then the bottom of the opening. Write down all 3 measurements and circle the narrowest. If rounding is necessary, round down to the nearest 1/8". That is your ordering width.
Now, let's do the Height
- Measure the inside of the window opening/frame from the top of the opening to the bottom of the opening/sill to the nearest 1/8" in three places: on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the tallest. That is your ordering height.
Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 1/4" to your blind's width to allow room for installation and for proper movement of the blind within the window opening. No deductions will be made to your height.
Outside Mount
Mounts on the wall or trim
Before you start measuring, decide where above your window opening you want to mount your blind. You will need at least 2" of flat vertical space above the window to mount the brackets. The blind can be installed directly above the window opening, or higher up to give the appearance of a larger window and to have more clear space in the window when the blind is raised.
If you have trim around the window, you can mount the blind above the trim, directly on the trim (if you have the required minimum flat space for the brackets), or to the sides of the trim if you do not enough mounting space above the window or on the trim itself. See the directions below for how you'd like to install your blind.
If you do not have sufficient vertical space for mounting the brackets, please see our inside mount instructions or consider a different product.
Decide what option is better for you
Need help measuring?
Our window experts can walk you through it, step by step.
- Call us(888) 256-8672Hablamos español
- HoursMon–Fri, 8am–5pm CST
- Have a question?Read our FAQs