Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Inside mounts require window frames at least 1 1/8" deep for installation.
• For a flush look, your window frames must be at least 3" deep.
• If your window frame isn't deep enough to support inside mounted blinds, choose outside mounted blinds instead.

Measuring Inside Mount Blinds

To get an accurate measurement of your windows before placing an order for inside mount blinds, follow these instructions:

1. Measure the inside width of your window opening in 3 locations - the top, middle and bottom. If they vary, record the smallest of your 3 measurements to the nearest 1/8".
   This is the width you will order, we will make the necessary deductions for inside mounting.
   The standard inside mount deduction on all wood and faux wood blinds is approximately 1/2" from the width you specify. This allows space for the blinds to operate and room for the mounting brackets. The standard width deduction on the valance (decorative molding that covers the headrail) is 1/8".
2. Measure the height of your window at three separate locations: the left side, center, and right side. Write down the largest of the three measurements and use it when ordering from Blindster.

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• They have no minimum depth requirement only a solid surface to attach the blinds is needed.
• The mounting surface needs to be at least 1 1/2" for 1" blinds and 2 1/2" for 2" - 2 1/2" blinds.
• When measuring, take into account the area of the flat mounting surface that you want to cover.

Measuring Outside Mount Blinds

Follow these instructions to get an accurate measurement of your outside mount blinds:

1. First, measure the entire width of the area you want to cover with your blinds. If you have extra space, allow an extra 1-1 1/2" per side to increase light blockage and privacy when the blinds are installed. The full width of your window plus the added measurements will be the final measurement you use when ordering the blinds from Blindster.
2. Next, measure the full height of the area you want to cover with your new blinds and make a note of it, as you'll use that measurement when ordering. It's important to keep in mind that you will need 1 1/2" to 2 1/2" of flat space to install mounting brackets. In general, adding 3" to 4" to the height of your opening will give you enough room to mount well above your window frame for a true outside mount.

Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Inside mounts require window frames at least 1 1/8" deep for installation.
• For a flush look, your window frames must be at least 3" deep.
• If your window frame isn't deep enough to support inside mounted blinds, choose outside mounted blinds instead.

Measuring Inside Mount Blinds

To get an accurate measurement of your windows before placing an order for inside mount blinds, follow these instructions:

1. Measure the inside width of your window opening in 3 locations - the top, middle and bottom. If they vary, record the smallest of your 3 measurements to the nearest 1/8".
   This is the width you will order, we will make the necessary deductions for inside mounting.
   The standard inside mount deduction on all wood and faux wood blinds is approximately 1/2" from the width you specify. This allows space for the blinds to operate and room for the mounting rackets. The standard width deduction on the valance (decorative molding that covers the headrail) is 1/8".
2. Measure the height of your window at three separate locations: the left side, center, and right side. Write down the largest of the three measurements and use it when ordering from Blindster.

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• They have no minimum depth requirement only a solid surface to attach the blinds is needed.
• The mounting surface needs to be at least 1 1/2" for 1" blinds and 2 1/2" for 2" - 2 1/2" blinds.
• When measuring, take into account the area of the flat mounting surface that you want to cover.

Measuring Outside Mount Blinds

Follow these instructions to get an accurate measurement of your outside mount blinds:

1. First, measure the entire width of the area you want to cover with your blinds. If you have extra space, allow an extra 1-1 1/2" per side to increase light blockage and privacy when the blinds are installed. The full width of your window plus the added measurements will be the final measurement you use when ordering the blinds from Blindster.
2. Next, measure the full height of the area you want to cover with your new blinds and make a note of it, as you'll use that measurement when ordering. It's important to keep in mind that you will need 1 1/2" to 2 1/2" of flat space to install mounting brackets. In general, adding 3" to 4" to the height of your opening will give you enough room to mount well above your window frame for a true outside mount.

Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Shade is installed directly inside window frame.
• Provides a clean, streamlined, and built-in look for the shade.
• Leaves all attractive woodwork exposed and retains natural charm of window.
• Requires a minimum depth of 1 3/8" for flush inside mount and 1/2" for standard inside mount.
• Install as outside mount if window frame isn't deep enough.

Measuring Inside Mount Blinds

To get an accurate measurement of your windows before placing an order for inside mount blinds, follow these instructions:

1. Measure the inside width of the window frame in three separate locations—at the top, middle, and bottom. Then, write down the smallest of these three measurements, as it will be the width you use when you place your order. When we receive your order, we will make the necessary deductions to ensure a proper fit.
2. Measure the inside height of the window frame in three separate locations left side, middle, and right side. Write down the smallest of these measurements and use it when ordering your shade from Blindster.

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• Best option is the window frame isn't deep enough to support inside mount.
• Allows for installation on wall, ceiling, or molding surface surrounding window.
• Can make windows appear larger or hide unattractive windows and doors.
• Doesn't have a minimum depth requirement for installation.
• Flat surface requirements on wall, ceiling, or window frame: 1 1/2" (1" blinds), 2 1/2" (2" & 2 1/2" blinds)

Measuring Outside Mount Blinds

Follow these instructions to get an accurate measurement of your outside mount blinds:

1. Measure across the window and the entire width of the area you wish to cover with the shade. If space allows, we recommend adding a total of 2" - 3" to your initial measurement to reduce light seepage and increase the privacy your shade provides. Use this number when placing your order. Note that the valance will be approximately 3/4" wider than the shade.
2. Measure the height of the window and the area you wish to cover with the shade. This number will be your ordering height. Note that you will need 1 1/2" to 2 1/2" of flat space on your mounting surface for mounting brackets. Once you place your order, the factory will manufacture your shade, including the headrail, to fit the exact height and width noted when the order was placed. To allow ample room to mount your shade above the window frame, add 3" - 4" to your height measurement when you place your order.

Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Inside mount installations are flush inside the window/door frame or extend from wall to wall.
• These installations maintain a clean, built-in look that preserves the beauty and appearance of custom woodwork surround doors and windows.
• Inside installations require at least 2 1/2" of space behind each track to open vertical slats.
• Requires 3" of depth for flush inside mounts and 2" of depth for standard inside mounts.
• Refer to outside mount instructions if window frame isn't deep enough.

Measuring Inside Mount Blinds

To get an accurate measurement of your windows before placing an order for inside mount blinds, follow these instructions:

1. Measure the inside width at 3 locations - the top, middle and bottom. Record the smallest of the 3 measurements. This is your ordering width. We will make the necessary deductions (approx. 1/2").
2. Measure the height at 3 locations: the left side, middle and right side. Record the smallest of the 3 measurements. This is your order height. We will make the necessary deductions (approx. 1/4").

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• Ideal option if window frame isn't deep enough to support inside mount installation.
• Outside mount installations allow you to mount the headrail to the wall, ceiling, or molding surface encasing the window.
• Creates the appearance of verticality in rooms with low ceilings.
• No minimum depth requirements for outside mount installations.
• For vertical shade installations, minimum flat surface area is 1 7/8". Note that the factory manufactures shades to the exact height and width indicated when order is placed.

Measuring Outside Mount Blinds

Follow these instructions to get an accurate measurement of your outside mount blinds:

1. Measure the width of the area you wish to cover. If space allows we recommend adding 6-12" inches total (3-6" on each side) to overlap the window and avoid light gaps.
2. Measure the height of the area you wish to cover. This is your ordering height (from the top of your blind to the bottom of the vertical vanes). Remember to allow for the 1 7/8" of flat space needed for your mounting brackets. Generally 3" - 4" added to the height of your opening (including molding or framework you wish to cover) will allow you room to mount above the window frame.

Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Entire shade fits inside window frame without any overlap.
• Gives window and shade a sleek, clean, and built-in appearance.
• Preserves appearance of original or intricate woodwork on window frame.
• Requires 1 1/4" minimum depth (1" for Super Value) and 2" for top down/bottom up or continuous loop.
• Requires 1 1/2" minimum depth (1 1/4" for Super Value) for flush inside mount, 2 1/4" for top down/bottom up or continuous loop.
• Use outside mount option if window frame isn't deep enough to support this installation.

Measuring Inside Mount Blinds

If you've decided to install your new shade inside your window frame, follow the instructions below to properly measure the window and provide the measurements to Blindster when you place your order:

1. Measure the width of your window opening in 3 places - top, middle and bottom. Record the most narrow of your 3 measurements to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8". This is the width you will order.
   The factory will deduct approx. 1/4" from the width you order to allow space for proper operation.
2. Measure the inside height of the window in three separate places: left, middle, and right. Record the largest of the 3 measurements. Use this height when placing your order with Blindster.

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• Best option if window frame depth isn't sufficient for inside mount installation.
• Allows you to mount shade to wall, ceiling, or molding surrounding the window.
• Increases apparent size of window and can hide unattractive windows or woodwork.
• No minimum depth requirements for installation.
• Requires at least 1 1/2" flat area on mounting surface for secure installation. Use measured area of mounting surface when measuring for ordering dimensions.
• Note that headrails for outside mount shades with top down/bottom up or continuous loop options are 1" wider than ordered width.

Measuring Outside Mount Blinds

Follow the instructions below to get the proper measurements for your shade if you're planning on installing it outside of your window frame:

1. Measure the width of the area you want to cover from outside edge to outside edge. This is the width you should order. The shade will be made to the exact size you specify.
2. Measure the height of the area you want to cover from outside edge to outside edge. This is the height you should order. There are no height deductions, the shade will be made to the height you order. Note: Headrails for outside mount shades with Top Down/Bottom Up or Continuous Cord Loop Options will be 1" wider than the width ordered (fabric is made to the ordered width).

Inside Mount Blinds

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Shade mounts directly inside window frame for clean, built-in, sleek appearance.
• Preserves appearance of woodwork to maintain intricate details and color.

Measuring Inside Mount Blinds

To get an accurate measurement of your windows before placing an order for inside mount blinds, follow these instructions:

1. Measure the width of your window opening in 3 places - top, middle and bottom. Record the most narrow of your 3 measurements to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8". This is the width you will order. The factory will deduct approx. 3/8 to 1/2" from the width you order to allow space for proper operation.
2. Measure the inside height of the window in three separate locations from the left side, middle, and right side of the glass.
   * Note: The largest of these three measurements, as it's the measurement you will use when placing your order.

Outside Mount Blinds

Here are a few important facts to know about outside mount blinds:

• Outside mounts are ideal options if window frames aren't deep enough to support inside mount installations.
• Provides the option to mount shade to wall, ceiling, or molding surrounding the window frame.
• When measuring, take into account the area of the flat mounting surface that you want to cover.

Measuring Outside Mount Blinds

Follow these instructions to get an accurate measurement of your outside mount blinds:

1. Measure the width of the area you want to cover from outside edge to outside edge. This is the width you should order. Including the end caps, the shade will measure approx. 1/4" wider than the size you specify.
2. Measure the height of the area you want to cover from outside edge to outside edge. This is the height you should order. There are no height deductions, the shade will be made to the height you order.

Inside Mount Shutters

Measuring For Inside Mount Shutters (Z-Frame or L-Frame)

Z-FRAME: Z-Frames are mounted around the edges of the window opening providing the look of a fully-cased window frame. Z-Frames can be installed in windows with up to a 1/2" variance between your 3 width and 3 height measurements. Make sure you have enough window depth to install the shutter.

Minimum depth:

• 2 1/2" louvers: front tilt 1 1/8" hidden tilt 1 5/8"
• 3 1/2" louvers: front tilt 1 5/8" hidden tilt 2 1/2"

L-FRAME: Inside mount L-Frame installations in window with variances between your 3 width and 3 height measurements will have a gap between the shutter frame and the window opening. Caulk can be used to fill the gap. If the variance is 1/2" or more, we recommend outside mount. Make sure you have enough window depth to install the shutter. The minimum depth required for an inside mount L-Frame shutter with 2 1/2" louvers is 2 1/8" with a front tilt bar & 2 5/8" with a hidden tilt bar. For 3 1/2" louvers, the minimum depth is 2 5/8" with a front tilt bar & 3" with a hidden tilt bar.

1. Measure the width of the window opening in three places (top, middle, bottom) and record the smallest measurement to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8".
2. Measure the height of the window opening in three places (left, center, right) and record the smallest measurement to the nearest 1/8". If rounding is necessary, round down to the nearest 1/8".
3. If the window has a sill that protrudes outside the window opening, there will be a flat bottom frame that will rest on top of the sill.
4. The measurements you record are the measurements you will order. Do not make any deductions.

Outside Mount Shutters

Measuring For Outside Mount Shutters (L-Frame Only)

L-FRAME: Make sure you have at least 1 3/8" of flat space to mount the L-Frame

1. Measure the width of the window frame including trim, from outside edge to outside edge, in three places (top, middle, bottom) and record the largest measurement. If rounding is necessary, round up to the nearest 1/8".
2. Measure the height of the window frame including trim, from outside edge to outside edge, in three places (left, center, right) and record the largest measurement. If rounding is necessary, round up to the nearest 1/8".
3. These are the dimensions you will order. Your shutters will be made to the exact measurements you specify.

Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• An inside mount installation mounts your shades directly inside your window frame and provides the sleekest and most "built-in" look.
• Allows you to preserve the visibility of intricate woodwork and molding.
• Provides excellent privacy and light blockage without noticeable gaps or light leaks.
• Generally requires a minimum window frame depth of at least 3" to 4" for proper mounting.
• If depth doesn't appear sufficient, consider using an outside mount instead

Measuring Inside Mount Blinds

To get an accurate measurement of your windows before placing an order for inside mount blinds, follow these instructions:

1. Measure the width of your window frame by taking measurements in three separate places at the top, middle, and bottom. Note the smallest measurement of these three, as this is the measurement you will provide Blindster when you place your order.
2. Measure the height at 3 locations - the left side, middle and right side. Record the smallest of the 3 measurements. Subtract 3/8" from the shortest height measurement. Use this as your ordering height. The shade will be 3/8" longer than the ordered height when the shade is fully and the vanes are closed.

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• An outside mount installation mounts your shades on the wall, window frame, or ceiling near the window you wish to cover.
• Outside mounts are the perfect option for windows with shallow frames that can't support inside mount installations.
• Allows you to hide unattractive windows, window frames, and woodwork.
• Makes your windows appear larger due to the window covering taking up a larger amount of space.

Measuring Outside Mount Blinds

Follow these instructions to get an accurate measurement of your outside mount blinds:

1. Measure the inside width the top of the window opening (where you will mount the shade). We will make the necessary deduction to the headrail to allow for mounting. (approx. 1/4"). The fabric on sheer shades will be approximately 1 1/8" narrower than the width you order width to allow for proper operation.
2. Measure the height at 3 locations - the left side, middle and right side. Subtract 3/8" from the shortest height measurement. This is the height you will order. The fabric on sheer shades will be approximately 1 1/8" narrower than the width you order to allow for proper operation. If concerned about light gaps, please order outside mount. Shades ordered wider than the actual window opening will not fit inside the window.

Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Inside mounts require window frames at least 1 1/8" deep for installation.
• For a flush look, your window frames must be at least 3" deep.
• If your window frame isn't deep enough to support inside mounted blinds, choose outside mounted blinds instead.

Measuring Inside Mount Blinds

To get an accurate measurement of your windows before placing an order for inside mount blinds, follow these instructions:

1. Measure the inside width the top of the window opening (where you will mount the shade). We will make the necessary deductions (approx. 1/8").
2. Measure the height at 3 locations - the left side, middle and right side. Record the largest of the 3 measurements. This is your ordering height.
   NOTE: Roller shade fabrics will be approximately 7/8" to 1-1/2 inches narrower than your ordering width to allow for brackets. If concerned over resulting light gap please select outside mount.

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• They have no minimum depth requirement only a solid surface to attach the blinds is needed.
• The mounting surface needs to be at least 1 1/2" for 1" blinds and 2 1/2" for 2" - 2 1/2" blinds.
• When measuring, take into account the area of the flat mounting surface that you want to cover.

Measuring Outside Mount Blinds

Follow these instructions to get an accurate measurement of your outside mount blinds:

1. Measure the width of the area you wish to cover. If space allows we recommend adding 2-3" (1-1 1/2" each side) to this measurement to help eliminate light seepage. This is your ordering width and will be the overall measurement of the blind.
2. Measure the height of the area you wish to cover. This is your ordering height. Be sure to take into account the flat mounting surface needed (see above) when measuring the area you want to cover with your shade. The factory will make your shade (including the roller at the top or the cassette valance, if ordered) to the height ordered. Generally 3" - 4" added to the height of your opening (including molding or framework you wish to cover) will allow you room to mount above the window frame.
   NOTE:Your shade material will be made 7/8" to 1-1/2 inches narrower than the measurement you provide to allow for brackets. If you need your shade to cover a specific width (e.g. for mounting a shade on a door) add 1-1/2 inches to your ordered width for the desire fabric width.

Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Shades and blinds that are inside mounted are installed flush with the interior of your window frame.
• These installations provide a built-in look that minimizes the appearance of the window when the blinds or shades are closed.
• Inside mounts are ideal if you wish to leave woodwork or other wall materials exposed.
• Minimum depth required for secure inside mount: 3/4"
• Minimum depth required for flush inside mount: 3" without fascia, 4 1/4" with fascia.
• If your window frame doesn't have the depth to support an inside mount, choose an outside mount installation instead.

Measuring Inside Mount Blinds

To get precise measurements that will provide a clean and flush look with your window frame, follow the steps below:

1. Measure the inside width the top of the window opening (where you will mount the shade). We will make the necessary deductions (approx. 1/8").
2. Measure the height at 3 locations - the left side, middle and right side. Record the largest of the 3 measurements. This is your ordering height.
   NOTE: Roller shade fabrics will be approximately 7/8" to 1-1/2 inches narrower than your ordering width to allow for brackets. If concerned over resulting light gap please select outside mount.

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• Outside mounts are the ideal installation option if your window frames aren't deep enough to support inside mounts.
• This option allows you to mount your blinds or shades to any surface near the window, including the ceiling, molding, or wall.
• Use this installation method to make your windows appear larger to hide unattractive windows.
• Minimum flat surface required for secure outside mount: 1 1/2". Note the flat mounting surface area when taking your measurements and that the factory will make the fabric 7/8" to 1 3/8" narrow than the ordered width.

Measuring Outside Mount Blinds

If your window frame doesn't provide minimum depth for an inside mount, or if you prefer the appearance of an outside mount, follow the instructions below to get accurate measurements:

1. Measure the width of the area you wish to cover. If space allows we recommend adding 2-3" (1-1 1/2" each side) to this measurement to help eliminate light seepage. This is your ordering width and will be the overall measurement of the blind.
2. Measure the height of the area you wish to cover. This is your ordering height. Be sure to take into account the flat mounting surface needed (see above) when measuring the area you want to cover with your shade. The factory will make your shade (including the roller at the top or the cassette valance, if ordered) to the height ordered. Generally 3" - 4" added to the height of your opening (including molding or framework you wish to cover) will allow you room to mount above the window frame.
   NOTE:Your shade material will be made 7/8" to 1-1/2 inches narrower than the measurement you provide to allow for brackets. If you need your shade to cover a specific width (e.g. for mounting a shade on a door) add 1-1/2 inches to your ordered width for the desire fabric width.

Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Inside mount installations place the shades directly inside the window frame and require precise measurements for a proper fit.
• When mounted inside the window frame, bamboo shades have a sleek, built-in look.
• This is the best option if you want to leave intricate or detailed woodwork exposed.
• Requires at least 1/2" of depth in window frame for a secure mount.
• Depth required for inside flush mount: 2-1/4" to 3-1/4" for standard lift and top down/bottom up; 4-1/4" for continuous loop lift cord.
• If your window frame doesn't provide enough depth, use the outside mount option instead.

Measuring Inside Mount Blinds

To get an accurate measurement of your windows before placing an order for inside mount blinds, follow these instructions:

1. Measure the interior width of the window and window frame in three separate locations at the top, middle, and bottom. Take note of the smallest of these three measurements, as it's the number you'll provide to Blindster when you place your order.
   Note: The factory will make necessary deductions of around 1/2".
2. Measure the interior height of the window and window frame in three separate locations at the left side, middle, and right side. Take note of the largest of these three measurements, as it's the number you'll provide to Blindster when you place your order.

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• Outside mount installations place the shade outside the window frame and make it possible to cover the entire window.
• This installation can be mounted to the wall, ceiling, or molding, making it highly versatile for a variety of window types and sizes.
• Outside mounts are perfect for hiding unattractive windows or making other windows appear larger.
• There are no minimum depth requirements, but a minimum flat surface of at least 1" is required. Always include the mounting surface area when measuring the area you want to cover with the shade.

Measuring Outside Mount Blinds

Follow these instructions to get an accurate measurement of your outside mount blinds:

1. Measure the full width of the area you wish to cover with the bamboo shade. If there's enough room to do so, add an extra 2" to 3" to your total width to help eliminate light leakage from the sides of the shade. Use the original measurement plus the extra width when placing your order, as your shade will be made exactly as specified when ordered.
2. Measure the full height of the area you wish to cover with the bamboo shade. As mentioned above, take into account at least 1" of flat mounting surface when doing your measurements. In addition, note that adding at least 3" to 4" of height added to your shade will allow you to mount it above the window frame.

Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Inside mounts require window frames at least 1 1/8" deep for installation.
• For a flush look, your window frames must be at least 3" deep.
• If your window frame isn't deep enough to support inside mounted blinds, choose outside mounted blinds instead.

Measuring Inside Mount Blinds

To get an accurate measurement of your windows before placing an order for inside mount blinds, follow these instructions:

1. Measure the inside width of your window at three separate locations: the top, middle, and bottom. Then, make a note of the smallest of the three measurements that's the width you'll use when placing an order at Blindster. Our manufacturing process will then make the necessary deductions, which are 3/8" to a 1/2".
2. Measure the height of your window at three separate locations: the left side, center, and right side. Write down the largest of the three measurements and use it when ordering from Blindster.

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• They have no minimum depth requirement only a solid surface to attach the blinds is needed.
• The mounting surface needs to be at least 1 1/2" for 1" blinds and 2 1/2" for 2" - 2 1/2"blinds.
• When measuring, take into account the area of the flat mounting surface that you want to cover.

Measuring Outside Mount Blinds

Follow these instructions to get an accurate measurement of your outside mount blinds:

1. Measure the entire width of the area you want to cover with your blinds. If you have extra space, allow an extra 1-1 1/2" per side to increase light blockage and privacy when the blinds are installed. The full width of your window plus the added measurements will be the final measurement you use when ordering the blinds from Blindster.
2. Next, measure the full height of the area you want to cover with your new blinds and make a note of it, as you'll use that measurement when ordering. It's important to keep in mind that you will need 1 1/2" to 2 1/2" of flat space to install mounting brackets. In general, adding 3" to 4" to the height of your opening will give you enough room to mount well above your window frame for a true outside mount.

Inside Mount Blinds

Inside mount blinds fit inside the window frame and provide a sleek, clean, and built-in look that preserves the appearance of woodwork and molding.

If you plan on mounting your blinds inside your window frames, keep the following tips in mind:

• Provides a sleek, low profile, and built-in look for your exterior solar shades.
• Mounts directly inside window frame for a flush appearance.
• Maintains the appearance and visibility of exposed woodwork and molding.
• Requires a minimum depth of at least 1 1/4" for a secure inside mount without cassette valance and 1 3/4" with cassette valance.
• Requires a minimum depth of at least 2 1/2" for an inside flush mount without cassette valance and 4" with cassette valance.
• If your window frames aren't deep enough to support installation based on minimum depth requirements, use the outside mount installation option instead.

Measuring Inside Mount Blinds

To get an accurate measurement of your windows before placing an order for inside mount blinds, follow these instructions:

1. Measure the interior width of the window opening where you plan on mounting the shade in three separate locations from the bottom, middle, and top. Take the smallest of these three measurements and this is the measurement you will use when placing your order with Blindster. Note that the factory will make slight deductions of around 1/8" when you place your order.
2. Measure the interior height of the window opening where you plan on mounting the shade in three separate locations from the left side, the middle, and the right side. Take the largest of these three measurements and this is the measurement you will use when placing your order with Blindster.
   Note: Roller shade fabrics are manufactured and shipped roughly 1" to 1/2" narrower than the ordered width to allow room for mounting brackets. If this will result in a large gap that allows too much light in, consider choosing an outside mount installation option instead.

Outside Mount Blinds

Outside mount blinds are perfect for windows that are too shallow to support the installation of inside mount blinds. They can be mounted to the wall, ceiling, or frame/molding around the window and are often used to make windows appear larger.

Here are a few important facts to know about outside mount blinds:

• Best option for windows that have shallow window frames.
• Allows you to mount the brackets to a variety of surfaces near the window, including the wall, ceiling, or molding.
• Helps make windows appear larger while also hiding unattractive woodwork, molding, and other details on windows you wish to keep hidden.
• Requires a minimum flat surface of at least 1 1/2" for a secure inside mount without cassette valance and 2" with cassette valance.

>Measuring Outside Mount Blinds

Follow these instructions to get an accurate measurement of your outside mount blinds:

1. Measure the full width of the area you wish to cover with your exterior solar shades. If space allows on your walls, add an extra 1" to 1 1/2" to each side of your measurement to reduce the amount of light leakage from the sides of the shade. Use this measurement plus any additions when you place your order with Blindster.
2. Measure the full height of the area you wish to cover with your exterior solar shades. When measuring, include the height of the flat surface mounting area necessary for the brackets in your final dimensions. Note that the factory will make your shade, including the roller or cassette valance if ordered, to the height you specify. Also note that 3" to 4" of height should be added to your order if you want to mount your shade above your window frame and cover any molding or framework.
   Note: When the factory makes your exterior solar shades, note that the shade material will be 1" to 1/2" narrower than the measurement you provided to allow room for brackets. If you need your shade to fit a specific measurement or width, add 1" to 1/2" to your ordered width to get the correct width.